DBX 231

Descripción

Input Connectors    1/4″ TRS, female XLR (pin 2 hot)

Input Type     Electronically balanced/unbalanced, RF filtered

Input Impedance     Balanced 40k ohm, unbalanced 20k ohm

Max Input      >+21dBu balanced or unbalanced

CMRR           >40dB, typically >55dB at 1kHz

Output Connectors 1/4″ TRS, male XLR (pin 2 hot)

Output Type  Impedance-balanced/unbalanced, RF filtered

Output Impedance  Balanced 100 ohm, unbalanced 50 ohm

Max Output   >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth    20Hz to 20kHz, +0.5/-1dB

Frequency Response        <10Hz to >50kHz, +0.5/-3dB

Dynamic Range      Typically >112dB

Signal to Noise Ratio         Typically >95dB

THD+Noise   <0.003%

Interchannel Crosstalk      <-90dB, 20Hz to 20kHz

Bypass Switch         Bypasses the graphic equalizer section in the signal path

Low cut Switch        Activates the 50Hz 12dB/octave high-pass filter

Range Switch          Selects either +/- 6dB or +/-12dB slider boost/cut range

Operating Voltage   100-240VAC 50/60Hz

Power Consumption          15W

Power Connector    IEC receptacle

Unit Weight  6.2 lbs.(2.81 kg)

Shipping Weight     7.9 lbs.(3.58kg)

Dimensions  3.5″ (8.9cm) H x 6″(15.24cm) D x 19″ (48.26cm) W